A SERVICE OF

logo

06/08 Rev. AA QUICK REFERENCE
9864
12
Material parameters
The following three parameters are used to set the material properties:
P For more information on setting parameters, see “Operating the
parameter menu” in the topic section “Info printouts and parameters.”
Parameter Function
PRINT PARAMETER > material type
Sets the material type (punched or
continuous)
PRINT PARAMETER > material length
Sets the material length
PRINT PARAMETER > material width
Sets the material width
SYSTEM PARAMETER > light sens. type
Sets the sensor type (reflex or
transmission) based on the material
(marks or perforations)
[Tab. 1] Important parameters for setting material properties