22
2 USING THE SCREENMANAGER
Function
(8) Exit the ScreenManager
a) To return to the main menu, select the “Return” icon or push the
down button twice, followed by the Enter button.
b) To exit the ScreenManager, select the “Exit” icon and push the
Enter button. Double clicking the Enter button at any time also
exit the ScreenManager menu.
This is the end of the Screen adjustment procedure.
Controls the contrast of the screen.
a) Select the “Contrast” icon and push the Enter
button to show the “Contrast/Brightness” menu.
b)Press the Auto adjustment button on the front
panel while displaying the “Contrast/Brightness
menu to automatically adjust contrast.
c) The screen blanks for a moment and adjusts the
contrast to the maximum level of the current
input signal.
* In the case of the percentage color flickering
between yellow and white, please note that
this is not an error but actually the most
optimum adjustment point.
* The brightness of the entire screen is con-
trolled by changing the “Brightness” controls.
No contrast adjustment is required except when
the graphics board or the resolution is changed
from the previous one.
d)Adjust the “Brightness” as desired using the up
and down buttons.
e) After finishing the adjustment, push the Enter
button to memorize the settings and return to the
“Screen” menu.
Too High
Too Low
OK
(7) “Contrast” Adjustment
