E
27
2 USING THE SCREENMANAGER
2-5 Other Settings
All of the icons shown in the ScreenManager “Others” menu are
described below.
Function
Automatically Turns off the Monitor
What is Off Timer
The Off Timer function allows the user to set the
time in which the monitor will be in operation,
called the “On Period” and automatically shifts the
operation into the “Power Off” mode when the set
“On Period” expires. The Off Timer function was
created to reduce after-image characteristics that are
particular to LCD monitors when the monitor
screen is left on for a long period without use.
1)Select the “Off Timer” icon and press the Enter
button to display “Off Timer” select menu.
2)Select “Enable” and press the Enter button.
3)Press the right/left button to adjust how long (1 to
23 hours) the monitor should be in the “On
Period”. Then, press the enter button to return to
the “others” menu.
Advance notice (indicator; flashing green) will be
given 15 minutes before the monitor will automati-
cally turn off and enter the “Power Off” modes .
To Delay Entering Power Off
To delay entering the “Power Off” mode, press any
button on the front panel located to the left of the
LED light during the advance notice period. The
monitor will continue to operate for an additional
90 minutes. There will be another advance notice
for 15 minutes as described. Delayed entrance into
the “Power Off” period can be extended as many
times as desired.
· The Off Timer function will work while
PowerManager is active, but there would be no
advance notice before the monitor's power
switches off.
Off Timer
