A SERVICE OF

logo

2-2. Connecting the Signal Cable
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of
the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable
Connector of the PC
PC
Signal Cable (MD-C87 enclosed)
Video Output Connector /
D-Sub mini 15 pin
Input Connector
(monitor) / D-Sub mini 15
pin
Standard graphics card
Power Macintosh G3 (Blue &
White) / Power Mac G4 (VGA)
Signal Cable (MD-C87 enclosed) + Adapter*
Video Output Connector /
D-Sub 15 pin
Input Connector
(monitor) / D-Sub mini 15
pin
Macintosh
*Macintosh Adapter (Optional)
Digital Input
Signal Cable
Connector of the PC
PC