A SERVICE OF

logo

English
16 2. CABLE CONNECTION
2-3. Connecting the signal cable (For the
computer employing ADC)
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
To Input the Signal Through ADC
Signal Cable Connector PC
Signal Cable (FD-C35/FD-C39,
enclosed) + ADC-DVI Display
Adapter (Commercially available)
Video Output Connector/
ADC
Input Connector
(monitor)/ DVI
Power Mac G4 / G5
(ADC)
NOTE
ADC-DVI display adapter is required if the monitor connects to Power Mac G4/
G5. The adapter is commercially available.
2. Plug the power cord into the power connector on the rear of the
monitor.
Power Cord