13
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [ »
AL 1] or
[
AL2] is displayed.
If the timer is deactivated, [ »
AL1] or
[
AL2] disappears.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later. »
Tip
You can press • / to adjust the interval to
repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm settings »
remain.
View the alarm settings
1 Press ALM 1 or ALM 2.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1 Ensure that you have set the clock
correctly. (See “Get started - Set time
and date”.)
2 Press and hold ALM 1 or ALM 2 for 2
seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE on the top panel to select
an alarm sound source: iPod/iPhone, FM
tuner, or buzzer.
4 Press ALM 1 or ALM 2.
The hour digits begin to blink. »
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2 to confirm.
The minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
Tip
If you set iPhone/iPod playlist as the sound •
source, you must create a playlist in iTunes
called “PHILIPS” and import it to your iPhone/
iPod.
If no playlist is created in the iPod/iPhone or
•
there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone.
English
EN
