10
3 Press SET TIME/PROG to confirm.
The hour digits begin to blink. »
4 Press / to set the hour.
5 Press SET TIME/PROG to confirm.
The minute digits begin to blink. »
6 Repeat steps 4-5 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is •
displayed.
in 24 hour format, [DAY--MONTH] is
•
displayed.
Turn on
1
Press POWER.
The unit switches to the last selected »
source.
Switch to standby
1 Press POWER again to switch the unit to
standby mode.
The time and date (if set) appear on »
the display panel.
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
•
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
•
you have completed all other connections.
Note
The type plate is located on the bottom of the •
main unit.
1 Connect the AC power cord to the wall
outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[24 HR] begins to blink. »
2 Press OK/ to select the 12/24 hour
format.
EN
