DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
SELECT PROGRAM NUMBER
TO END PUSH EXIT
34 Timer Recording
Follow the steps below to program your DVD/VCR to record TV
programs while you’re away from home. Before you begin:
● Set up the TV channels at the DVD/VCR. Details are on page 24.
● Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the TV screen briefly after you select PROGRAM, fol-
lowed by the VCR menu. Follow the directions on page 27 to
set the VCR’s clock.
● Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
● Press OUTPUT SELECT so the green VIDEO light appears on
the front of the DVD/VCR.
● Press VCR/TV so the green VCR/TV light appears on the front
of the DVD/VCR.
Do each step within 60 seconds of the previous step.
1
Press VCR, then press DISC/MENU.
SELECT op CHOOSE B
→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press PLAY B (o) or STOP C (p) to select PRO-
GRAM, then press FF g (B).
SELECT op CHOOSE B
→ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3
Press PLAY B (o) or STOP C (p) to select a
ONCE, DAILY, or WEEKLY recording.Then, press
FF g (B).
● ONCE: The DVD/VCR will record a TV program on any
day you choose, up to 12 months away.
● DAILY: The DVD/VCR will record the same channel
every day from Monday to Friday – starting at the same
time and recording for the same length of time.
● WEEKLY: The DVD/VCR will record the same channel
on the same day, at the same time, and for the same
length of time every week.
Daily
Recording
(example)
• To make a correction while pro-
gramming a timer recording, press
CLEAR until the cursor is flashing
on the item you want to change.
Then enter the correct information.
Helpful Hint
2,3
1
VCR
H9231CD(EN).QX3 02.9.5 7:13 PM Page 34
