Using your video recorder remote control
with your TV set
Your video recorder remote control can transmit several
commands to TV sets of different makes.
By using the TV buttons on the panel in the middle of the
control, you can:
Sq increase the TV volume
Sr reduce the TV volume
TV y switch off sound
TV m switch off the TV set
TV q next programme number
TV r previous programme number
a Hold TV y and enter the correct remote control
command with the number buttons 0-9 .
You will find a list of all available remote control
commands on the last page of this manual.
DIf the selected code does not work with your TV set,
or if the make of your TV is not in the list, you can try
out the codes one after the other.
Selecting the sound track
You can select the required sound track. This is of particular
interest when the audio transmissions are multilingual.
a Press SELECT . The current settings will appear on the TV
screen.
b By pressing SELECT several times you can select from
the four possibilities displayed (’STEREO’, ’RIGHT’,
’LEFT’, ’MONO’, ’MIXED’).
DDubbed sound recordings can be replayed with the
’MONO’or’MIXED’ setting.
’MONO’: Dubbed (linear) sound track.
’MIXED’: Original sound (hi-fi sound track) together
with dubbed sound (linear sound track).
DIf the cassette does not have stereo sound recorded
on it, the video recorder will automatically switch to
mono.
27
