A SERVICE OF

logo

STEP 7:
After enabled the Auto-config feature, the VIP-154T A
shall be able to obtain IP address and
SIP extension information from IP PBX system IPX-2000 information. To verify the
auto-config results, you may check the extension number from LCD display assigned by
IPX-2000.
STEP 8
Repeat the same configuration steps on VIP-154T B
, and check if the VIP-154T B is
successfully registered with the IPX-2000 as one of the IP extensions.
Test the scenario:
To verify the VoIP communication, you may make calls from extension side (VIP-154T A) 1001 to the
number 1002 (VIP-154T B
) or reversely make calls from extension client (VIP-154T B) 1002 to the
number 1001 (VIP-154T A
)
Case 2: VIP-154T to VIP-154T connection via IP address
Assume there are two VIP-154T’s in the network the IP address are 192.168.0.1, 192.168.0.2
52
192.168.0.2
192.168.0.1
1 9 2 * 1 6 8 * 0 * 2 #