Operation steps:
Pick up the VIP-154T A, you should be able to hear the dial tone, press the keypad: 192*168*0*2# shall
be able to connect to the VIP-154T B.
Then the phone in 192.168.0.2 should ring. Please repeat the same dialing steps on VIP-154T B to
establish the first voice communication from the second VIP-154T
y If the IP address of the remote calling party is known,
you may directly make calls via its IP address and end
with an “#”.
y If the IP phones are installed behind a NAT/firewall/
IP sharing device, please make sure the NAT device
support SIP applications before making calls
L Hint
Case 3: Voice communication via SIP proxy server _SIP-50
VIP-154T IP Address: 192.168.0.1
Line Number: 1001
VIP-154T IP Address: 192.168.0.2
Line Number: 2002
SIP-50 IP Address: 192.168.0.50
Machine configuration on the VIP-154T:
STEP 1:
Log in SIP-50 and create two testing accounts/password: 1001/123 (for VIP-154T A), and
1002/123(for VIP-154T B) for the voice calls.
STEP 2:
Please log in VIP-154T A via web browser, browse to the SIP setting menu and select the
Domain Service config menu. In the setting page, please insert the account/password
information obtained from your service provider (in this sample, we’re using PLANET SIP-50
as the SIP Proxy server for SIP account, call authentications), and then the sample
configuration screen is shown below:
53
