A SERVICE OF

logo

16
3. Plug the adapter’s cigarette-lighter plug into your
vehicle’s cigarette-lighter socket.
Note:
If the scanner does not operate properly when you
connect a DC adapter, unplug the DC adapter from the
cigarette-lighter socket and clean the socket to remove
ashes and other debris.
CONNECTING THE ANTENNA
Follow these steps to attach the supplied flexible antenna
to the
ANT
jack on the top of your scanner.
1. Align the slots around the antenna’s connector with
the tabs on the
ANT
jack.
2. Press the antenna down over the jack and turn the
antenna’s base clockwise until it locks into place.
20-522.fm Page 16 Friday, September 17, 1999 12:46 PM