6 ST60 Wind & Close Hauled Wind Instrument Owner’s Handbook
1.3 Display illumination
When the instrument is first powered up, the display illumination is set to its
lowest (courtesy) level, to facilitate initial access to the keys.
To adjust the level of display illumination:
1. Hold down the
disp key for approximately one second, to enter the illumina-
tion-adjust mode.
2. There are four preset illumination levels. Momentarily press the
disp key to
cycle through these levels until you reach the level you want.
3. Press any other key to leave the illumination-adjust mode.
Note:
The digital display will return to normal operation 7 seconds after the last key press.
1.4 Remote control
When connected to SeaTalk, the ST60 Wind and Close Hauled Wind instruments
can be controlled remotely with a SeaTalk Remote Keypad Unit. When any
instrument on the SeaTalk bus is selected, the TRUE/APP indicators on the digital
display will flash to indicate that the keypad has control.
Details on how to use the remote control facility can be found in the
SeaTalk
Remote Keypad Owner’s Handbook
.
