INDEX SEARCH
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording.
During playback you can locate the program you want to play
by the number of index marks or by scanning. The VCR will
search forward or reverse from the location you are on the tape-
To Search:
1.
2.
Press STOR
Press SEARCH on the remote to display the INDEX SEARCH
on-screen display.
3. If you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
4. Press FWD to search forward or REVto search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR wilt locate the
next index mark and begin playback.
5. Press STOP to end index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape
• The mark at the beginning of a recorded segment of five
minutes or less
• The first index mark on the tape when you start at the
beginning of the tape.
GO-TO SEARCH
The Go-To Search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. PressSTOR
2,
3.
Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
Press number buttons to enter the hour and/or minute of
the counter reading you want the VCR to "go to." Press
CLEAR on the remote to correct an entry.
48
INDEX SEARCH
Press REV OR FWD
to begin scanning
OR
enter a specific
index number
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
I If you insert a pre-recorded tape ]
with the safety tab removed-- Index !
and Go-To searches are not available.
