AUDIO
I Reception: STEREO
2 Tape Playback: HI-FI
0 Exit
Now you are ready to select an item from the menu to set up.
RECEPTION
Some TV programs are broadcast with stereo audio or a
Second Audio Program (SAP) which offers a second language.
The reception feature lets you select the type of audio you want
to record. Press 1 to switch between Reception: STEREO,MONO,
and SAR
• Select STEREOfor normal or stereo broadcast TV recording.
• Select MONO if the stereo signal is weak and the sound is too
noisy.
• Select SAP to record a Second Audio Program instead of
normal audio on both the Hi-Fi and linear tracks.
TAPE PLAYBACK
The VCR records the same audio on both Hi-Fi and linear tracks
on the tape. Hi-Fi sound is recorded on a separate left and right
stereo channels. Monaural sound is recorded on the linear track.
Press 2 to switch between tape playback: HI-FI, LINEAR, and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/receiver using the AUDIONIDEO jacks. The Tape
Playback feature lets you select which audio you use during
playback.
• Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
• Select LINEAR to play back sound recorded on a linear
monaural track, such as a Second Audio Program (SAP),
or a dubbed voice.
• Select MIX to play back the sound recorded on both the
linear and Hi-Fi tracks, sound-on-sound.
• j
To receive Hi-Fi stereo sound, use
audio-video cables with a compatible
TV or receiver. Using only the RFOUT
jack will not produce stereo sound.
51
