Error & Status Messages
63
6
Reset PCU Correctly The photoconductor unit is
not installed in the printer.
Install the photoconductor
unit correctly.
⇒
P.88 “Re-
placing the Photoconductor
Unit”
Reset Toner Correctly The toner cartridge is not
installed correctly.
Install the cartridge cor-
rectly.
⇒
P.85 “Replacing
the Toner Cartridge”
Reset Tray Correctly The paper tray is not in-
stalled correctly.
Install the paper tray cor-
rectly.
The tray on the paper feed-
ing path is not set correctly
when the printer receives
the print job.
Install the paper tray cor-
rectly. The printer will re-
start printing automatical-
ly.
Reset Waste Toner The waste toner bottle is
not installed correctly.
Install the waste toner bot-
tle correctly.
⇒
P.92 “Re-
placing the Waste Toner
Bottle and Charger”
Toner is Low: XXX The indicated toner is low
or has run out.
Replace the toner cartridge.
⇒
P.85 “Replacing the Toner
Cartridge”
WarmUp The printer is preparing for
printing.
Wait until the printer is
warmed up.
Waste Toner is Full The waste toner bottle is
full.
Replace the waste toner
bottle.
⇒
P.92 “Replacing
the Waste Toner Bottle and
Charger”
Waste Toner Nearly Full The waste toner bottle is
nearly full.
Replace the waste toner
bottle.
⇒
P.92 “Replacing
the Waste Toner Bottle and
Charger”
Message Description Comments
