Changing the Preset Station Table
You can rearrange the preset TV stations according to your own
preferences:
◆ Programme number assigned to the station
◆ Name assigned to the station
1 Press the MENU button on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding or buttons, until the cursor is placed
in front of the INSTALLATION option.
3 Press the button to select this option.
Result
: The INSTALLATION menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the MANUAL SET UP option.
5 Press the button to select TV STATION TABLE.
6 Press the corresponding or buttons, until the cursor is placed
in front of the required preset TV programme.
Result
: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station (PR4
instead of PR1 for example):
◆ Press OK
◆ Press the or buttons until the cursor is placed in front of
the programme to which the station is to be moved
◆ Press OK again
8 To change the programme’s name, press the button.
Result
: The first letter of the name flashes.
9 To... Then...
Select a character Press the or button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the or buttons
previous character respectively.
10 Press the button again to confirm all your choices and move to
the next station; you can modify this station by repeating the same
procedure from Step
6 onwards.
11 On completion, press the MENU button three times to exit the
menu.
GB
22 23
GB
You can record a cassette at two different speeds:
PAL/SECAM/MESECAM NTSC/PAL-M
◆ SP (Standard Play) ◆ SP (Standard Play)
◆ LP (Long Play) ◆ SLP (Super Long Play)
In Long Play or Super Long Play modes:
◆ the recording is of a slightly lower quality.
To record a cassette: Press the REC.SPEED button on the
remote control, until:
in standard play mode SP is displayed.
in long play mode LP is displayed (PAL/SECAM/MESECAM).
in super long play mode SLP is displayed (NTSC/PAL-M).
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the or buttons, until the cursor is placed in front of the
USER SET option.
3 Press the button to select USER SET1.
4 Press the button to select this option.
Result
: The cursor is set to the TAPE SELECT option.
5 Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180/T120 E240/T160
E 300 E260/T180
6 Press MENU twice to exit the menu.
Selecting the Recording Speed
Type Recording Time
PAL/ SECAM NTSC
E-180/T120 180 mins 120 mins
E-240/T160 240 mins 160 mins
E-260/T180 260 mins 180 mins
E-300 300 mins
