A SERVICE OF

logo

Using the A 200 personal sound amplifier
A 200 | 7
Switching the A 200 on/off
̈ Turn the on/off/sound amplification control 5 towards ON until you
overcome a slight resistance.
Adjusting the sound amplification
You can choose between 6 different settings for the sound
amplification 6. Position “1” corresponds to a low sound amplification
and position “6” corresponds to a very high sound amplification.
̈ Use the control 5 to adjust the volume to a sufficient and comfort-
able level.
̈ If you hear a loud noise (feedback), turn the control 5 towards OFF
until the noise disappears.
5
6
5