WHAT TO DO IF ...
... the volume is up but you ̈ There is no audio signal available. Check the transmitter
cannot hear anything: connection. Is the volume at the headphone socket of your
sound source sufficient?
̈ Are you still within the transmitter’s range?
̈ Is the receiver on the same frequency as the transmitter?
... the sound is distorted: ̈ The receiver accupack has gone flat, please
recharge it immediately.
̈ The volume on the receiver is adjusted too high.
Reduce the volume.
... the sound is slightly noisy: ̈ You are about to leave the transmitter’s maximum range.
Soon transmission will be interrupted completely.
̈ The transmitter’s modulation level is too low.
Increase the volume on your sound source.
... you can hear twittering and ̈ Two transmitters are interfering!
chirping, and the sound is “squeezed”: Choose a different transmission channel.
... the transmitter switches off ̈ The volume on your TV set is adjusted too low. Adjust
during operation: the volume on the TV set such that the LED on the
transmitter blinks occasionally.
ACCESSORIES
̈ BA 151 Rechargeable accupack as a spare, for use when the supplied
accupack is being recharged.
̈ L 151-2 Charger for recharging two BA 151 accupacks (recommended
when more than two stethoset receivers are used with one
transmitter).
̈ RR 2400-8 Additional stethoset receiver
