A SERVICE OF

logo

Open as PDF
next previous
Figure 2-4. Use the single sheet guide for loading cut paper.
Table 2-1
Left margin on the single sheet guide
Position of
Distance from Left-Hand Edge of Paper
Guide
For SR-10
For SR-15
Left
Approx. .6 inch
Approx. .8 inch
Middle
Approx. .3 inch
Approx. .5 inch
Right
Approx. .l inch
Approx. .3 inch
a Loading sprocket-feed paper
Continuous paper feeds into the printer from the rear. So, the
paper should be stacked directly back of the printer, either on
the same surface, if there’s room, or on the floor.