Toshiba 32AV700E Manual

A SERVICE OF

next previous

13

Introduction / Getting started

3 PressQtodisplaytheAuto Tuningmenu.

Auto Tuning

Previous settings will be Lost!

Press EXIT for no change.

Press OK key to start auto tune.

4 PressQtostarttheautomaticsearch.

Thesearchwillbeginforallavailablestations.

5 Whentheautomaticsearchiscompleted,

theTVwillautomaticallyappeartheManual

Tuningmenu.

6 ClosingtheAuto Tuningmenu,pressEXIT.

Note:

Whenyoupresetthechannelwhichsound

of broadcast transmission system adopts “M”

system, the sound system may not be tuned

correctlyiftheradiowavestransmitbadly.Atthat

time, preset the channel by Manual Tuning.

ThecountriessuchasMyanmar,Brazil,Chile,

Colombiaapplytothiscase.Seepage31for

more details.

Manual Tuning

1 FromtheSETUP menu,presssorrto

selectManual Tuning.

2 PressQtodisplaytheManual Tuning

menu.

Presssorrtoselecttheprogramme

positionyouwanttoarrange.

3 PressQtodisplaythebreakdownmenu.

Pressv orwtoselectanitem,thenpresss

orrtoselecttheitemasshownbelow.

Manual Tuning

Position

0

1 B/G A 0

On

A C E G

H

FDB

A. Position selection

B. System (Sound) (- page 31)

C. Colour System (- page 31)

 A:Automatic(factoryset),P:PAL,

S:SECAM,4:NTSC4.43(MHz),

3:NTSC3.58(MHz)

 Ifthecolourofacertainchannelis

abnormal,theautomaticcoloursystem

selection(A)mayhavemalfunctioned,or

soundsystemselectioniswrong.Insuch

acase,selectanothercolourand/orsound

system(-page31).

D. Position skip selection

 Presssorrtoturnthepositionskip

optionon“8”oroff“(”.

 Thepositionwillthenbeskippedwhenyou

selectchannelswithPUorPu.

 The“8”markwillappearbesidea

positionnumberwhenyouusethe

Numberbuttonontheremotecontrol.

E. Channel search operation

 Pressrtosearchupthebandorsto

searchdowntheband.

 Presssorrrepeatedlyuntilyourdesired

channelisdisplayed.

 Whenastationisfound,itwillbe

displayed.

 NEVERPRESSANYOTHERBUTTONS

WHILETHESETISTUNING.

F. Manual Fine Tuning

 Presssorruntilbetterpictureand

soundareobtained.

G. Signal Booster

 Ifthereceivingsignalisweak/strongand

thepictureisnoisy,thepicture maybe

improvedwhenusingthisfunction.

 PressthesorrtoturntheSignal

BoosterOnorOff.

H. Label

 Stationlabelsappearunderthe

programmepositiondisplayeachtimeyou

turnontheTV,selectachannel,orpress

.

To change or create station labels:

 1) Presssorrrepeatedlytoselecta

characterfortherstspace,thenpress

v orw.

*(blank space)

 2) Repeatstep1)toentertherestofthe

characters.Ifyouwouldlikeablank

spaceinthelabelname,youmust

chooseablankspacefromthelistof

characters.

PressQtostoreyoursettings.

Setting the Location

YoucanselecteitherHomeorStoremode.

Homeisrecommendedfornormalhomeuse.

SelectStorewhenusingaTVfordisplayingina

shop,etc.

1 FromtheSETUP menu,presssorrto

selectLocation.

2 Pressv orwtoselectHomeorStore.