65
Installing User
Software on a
Windows Computer
When configuring Two-way Communication in the PostScript printer driver on
Windows NT 4.0, Windows 2000, or Windows XP
1
Select the printer driver in the Printers folder and click on [File] and select [Properties].
• The printer drivers properties dialog box appears.
2
Click on the [Configuration] tab.
Check the “Two-Way Communication” check
box and enter the IP address or DNS Name in
the field. Then click on [Update].
• It begins communicating to the GA-1140 printer via
network and obtain the option settings automatically.
3
Click on [OK] to save settings.
Continue the operation to set the user
information on the printer driver.
P66 “Setting the User Information”
NOTE:
Please wait until the [Update] button will be
active after clicking on it. The option
settings would not be obtained if you click
[OK] before the [Update] button becomes
active.
