4 Replacement Procedures 4.14 Display Mask
4.14 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-28.
1. Remove the following 6 seals on the display module in that order:
- Four black seals on the bottom
- Two black seals on the top
2. Remove the following 6 screws on the display module, in that order:
- four M2.5x2 black flat head screws on the top
- Two M2.5x4 black flat head screws on bottom
3. Release the following 15 latches on the display mask, in that order:
- Five bottom latches
- Four latches on each of the left and right sides
- Two top latches
Display mask
Latch
M2 5x2 black flat head screw.
Seal
M2 5x4 black flat head screw.
Seal
Figure 4-28 Removing the display mask
4-48 Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200 Maintenance Manual
