31
Setting up your computer and getting started
5.375 x 8.375 ver 3.1
Never tamper with the power cord/cable or plug; never splice or alter
a power cord/cable; never bend or twist a power cord/cable; never
place heavy objects on a power cord/cable; never place a power
cord/cable near a heat source; never run a power cord/cable through
a pinch point such as a door or window; never use nails, staples or
similar objects to fasten or attach power cord/cable in place; never
attempt to disassemble or repair an AC adapter or a Battery Charger.
Doing any of the above may damage the power cord/cable, and/or
result in a fire or electric shock, possibly resulting in serious injury.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Connecting a printer
Your printer documentation may require you to install the printer
software before physically connecting the printer to your computer. If
you do not install the software as instructed by the printer
manufacturer, the printer may not function correctly.
Read the documentation that came with your printer. Follow the
manufacturer’s instructions when connecting a local printer.
Connecting a USB printer
You can connect a USB-compatible printer to your computer
through one of the USB ports.
To confirm a printer’s compatibility, check its documentation.
To achieve the connection, you need a suitable USB cable,
which may come with your printer. Otherwise, you can
purchase one from a computer or electronics store.
Follow the manufacturer’s instructions for connecting a USB printer
to your computer.
Installing additional memory (optional)
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or Hibernation mode, data will be
lost.
