34
Setting up your computer and getting started
5.375 x 8.375 ver 3.1
10 Check that the module is lined up with the socket clips.
11 Gently press down on the memory module connector
until the clips snap into place.
Do not force the memory module into position. The
memory module should be level when secured in place.
Inserting the memory module into the slot
The clips on either side of the memory module will click
to secure the memory module.
Avoid touching the connectors on the memory module or on the
computer. Grease or dust on the connectors may cause memory
access problems.
12 Replace the memory module cover and the screw.
13 Turn the computer over and reconnect any cables you
removed.
14 Restart the computer.
When you turn on the computer, it automatically
recognizes the additional memory.
Removing a memory module
If you use the computer for a long time, the memory modules will
become hot. If this happens, let the modules cool to room
temperature before you replace them.
1 Follow steps 1 through 6 in “Installing additional
memory (optional)” on page 31.
