-37-
The following items are displayed on this screen:
DHCP Settings
DHCP Server:
Enable or disable the DHCP server on your router. Select Enable to
make the router automatically assign TCP/IP parameters to the
computers in the LAN.
Start IP Address:
Enter the Start IP address to define a range for the DHCP server to
assign dynamic IP addresses. This address should be in the same IP
address subnet with the router’s LAN IP address. The default address
is 192.168.0.2.
End IP Address:
Enter the End IP address to define a range for the DHCP server to
assign dynamic IP addresses. This address should be in the same IP
address subnet with the router’s LAN IP address. The default address
is 192.168.0.254.
Lease Time:
Specify the length of time the DHCP server will reserve the IP address
for each computer. After the IP address expired, the client will be
automatically assigned a new one.
Default Gateway:
Optional. Enter the Gateway address to be assigned. It is
recommended to enter the IP address of the LAN port of the router.
Default Domain:
Optional. Enter the domain name of your network.
Primary DNS:
Optional. Enter the Primary DNS server address provided by your
ISP. It is recommended to enter the IP address of the LAN port of the
router.
Secondary DNS:
Optional. If a Secondary DNS Server address is available, enter it.
4.3.2.3 DHCP Client
On this page, you can view the information about all the DHCP clients connected to the router.
Choose the menu Network→LAN→DHCP Client to load the following page.
