-43-
Set the MAC Address for WAN port:
In the condition that your ISP has bound the account and the MAC address of the dial-up device, if you
want to change the dial-up device to be TL-R470T+, you can just set the MAC address of TL-R470T+’s
WAN port the same to the MAC address of the previous dial-up device for a normal Internet
connection.
Choose the menu Network→MAC Address→MAC Address to load the following page.
Figure 4-16 MAC Address
The following items are displayed on this screen:
MAC Address
Port:
Displays the port type of the router.
Current MAC Address:
Displays the current MAC address of the port.
MAC Clone:
It is only available for WAN port. Click the <Restore Factory MAC>
button to restore the MAC address to the factory default value or
click the <Clone Current PC’s MAC> button to clone the MAC
address of the PC you are currently using to configure the router.
Then click <Save> to apply.
Note:
To avoid a conflict of MAC address on the LAN, it is not allowed to set the MAC address of the router’s
LAN port to the MAC address of the current management PC.
4.3.5 Switch
Some basic switch port management functions are provided by TL-R470T+, which facilitates you to
monitor the traffic and manage the network effectively.
