© Copyright 2012 TRENDnet. All Rights Reserved.
24
TRENDnet User’s Guide
TEW-691GR
MAC Filters
Wireless > Security
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wireless network.
1. Log into your router management page (see “
Access your router management page”
on page 24).
2. Click on Wireless, click on Security.
3. Review the MAC Filter options.
• Filter Mode: Select the mode applied to t listed MAC addresses.
o Allow computers/devices with MAC addresses listed below to access the local
network, web management, and the Internet.
o Deny computers/devices with MAC addresses listed below to access the local
network, web management, and the Internet
Note: MAC filter can be configured to allow access to the listed MAC address and
deny all others unlisted or vice versa. The recommended function is to choose to
only allow access to the MAC addresses listed and deny all others unlisted because it
is easier to determine the MAC addresses of devices in your network then to
determine which MAC addresses you do not want to allow access.
4. Click Apply to save settings
Advanced Router Setup
Access your router management page
Note: Your router management page http://192.168.10.1 is accessed through the use of
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to
http://192.168.10.1. Your router will prompt you for a user name and password.
2. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
Using the Configuration Menu
Whenever you want to configure your TEW-691GR, you can access the Configuration
Menu by opening the Web-browser and typing in the IP Address of the TEW-691GR.
• Open the Web browser.
• Type in the current IP Address of the AP (i.e. http://192.168.10.1)
• Type admin in the User Name field.
• The Password is admin.
• Click Login In.
When you log into the unit the initial screen you will see is the status page that provides
system information and network configurations.
