Security Configuration
Dest IP
These settings determine which traffic, based on their destination
IP address, is covered by this rule.
Select the desired option:
• Any - All traffic from the source port is covered by this rule.
• Single address - Enter the required IP address in the "Start IP
address" field". You can ignore the "Subnet Mask" field.
• IP Address List - If this option is selected, choose the re-
quired option.
Services
Select the desired Service or Services. This determines which
packets are covered by this rule, based on the protocol (TPC or
UDP) and port number. If necessary, you can define a new
Service on the "Services" screen, by defining the protocols and
port numbers used by the Service.
Advanced Rule
Select the desired advanced rule .
Port Transfer To
Enter the required data.
Select Schedule
Select the desired option from the list.
Action
Select the desired action for packets covered by this rule:
Log Setting
This determines whether packets covered by this rule are logged.
Select the desired option.
59
