8
8
Mixing Console – Editing the Volume and Tonal Balance –
78 • Tyros3 Owner’s Manual
Mixing Console
– Editing the Volume and Tonal Balance –
There are many components that make up the overall sound of the
Tyros3. These include MIDI sequence data from the Styles, Songs, and
Multi Pads, and audio input from a microphone, as well as the various
parts of your keyboard performance. The Mixing Console gives you
control over the volume and pan settings of each of these components-
and some other settings as well—letting you fine-tune the overall sound
of the Tyros3.
1 Press the [MIXING CONSOLE] button to call up the MIXING
CONSOLE display.
2 Use the TAB [
QQ
QQ
][
WW
WW
] buttons to call up the desired page.
For details about each display Page, refer to the Reference Manual on the website.
• VOL/VOICE......... Changes the Voice for each part and adjusts panning and
volume for each part. Using the Auto Revoice function,
you can also convert the sound of commercially available
XG song to the special sound using Tyros3’s special Voices.
• FILTER ................. Adjusts the Harmonic Content (resonance) and sound
brightness.
• TUNE.................... Pitch-related settings (tuning, transpose, etc.).
• EFFECT................ Selects effect type and adjusts its depth for each part.
• EQ......................... Adjusts equalization parameters to correct the tone or tim-
bre of the sound.
• CMP...................... This is the Master Compressor setting which determines
the dynamics of overall sound. See page 80.
• LINE OUT............ You can specify the output of each part to any of the LINE
OUT jacks. For Drum Parts, you can even select specific
instruments to be output through any LINE OUT jack.
Basic Procedure
2
The Master Compressor is not applied
to audio playback (page 75).
NOTE
