A SERVICE OF

logo

4 - 19
CHAS
FRONT AND REAR BRAKES
2. Remove:
brake pad clips 1
brake pad pins 2
brake pad spring 3
3. Remove:
brake pads 1
(along with the brake pad shims)
4. Measure:
brake pad wear limit
Out of specification Replace the brake
pads as a set.
5. Install:
brake pad shims
(onto the brake pads)
brake pads
brake pad spring
NOTE:
_
Always install new brake pads, brake pad
shims, and a brake pad spring as a set.
Brake pad wear limit
0.5 mm (0.02 in)