A SERVICE OF

logo

7 - 40
FI
AIR INDUCTION SYSTEM
5. Check
Al system solenoid
▼▼▼ ▼▼▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼
a. Remove the AI system solenoid coupler
from the wire harness.
b. Connect the pocket tester ( × 1) to the AI
system solenoid terminal as shown.
c. Measure the AI system solenoid resistance.
d. Out of specification Replace.
▲▲▲ ▲▲▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
Tester positive probe
orange
1
Tester negative probe
green
2
Al system solenoid resistance
18 ~ 22
at 20 °C (68 °F)