A SERVICE OF

logo

4 - 21
CHAS
FRONT AND REAR BRAKES
EAS00583
REPLACING THE REAR BRAKE PADS
NOTE:
_
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
brake caliper
1
2. Remove:
brake pads
1
(along with the brake pad shims)
3. Measure:
brake pad wear limit
Out of specification
Replace the brake
pads as a set.
4. Install:
brake pad shims
(onto the brake pads)
brake pads
NOTE:
_
Always install new brake pads and brake pad
shims as a set.
Brake pad wear limit
0.8 mm (0.03 in)