A SERVICE OF

logo

4 - 49
CHAS
FRONT FORK
NOTE:
@
Use the side of the rod holder that is marked
B.
c. Loosen the nut.
d. Remove the cap bolt.
e. Remove the rod holder and fork spring com-
pressor.
WARNING
_
The fork spring is compressed.
f. Remove the spacer and nut.
▲▲▲ ▲▲▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
Fork spring compressor
YM-01441
Rod holder
YM-01434
2. Remove:
dust seal
oil seal clip
1
oil seal
washer
(with a flat-head screwdriver)
CAUTION:
@
Do not scratch the inner tube.
3. Remove:
damper rod assembly bolt
NOTE:
@
While holding the damper rod assembly with
the damper rod holder
1
, loosen the damper
rod assembly bolt.
Damper rod holder
YM-1423