Filter
Top Products
Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3 Page 8
Data bits – 8
Parity – None
Stop bits – 1
Flow Control – None
SSH
The default root password for SSH is
digium
.
b) Create or edit the custom.cfg file, which resides in the
var/lib/asterisk/sounds/phoneprov_configs/ folder on the CompactFlash card.
The custom.cfg file is in xml format and specifies the user-defined settings that will be provided
to all phones that use the appliance.
The following shows the contents of the polycom.xml file, which you can use as a template:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<config>
<digitmap
dialplan.1.digitmap="1xxx|5xxx|6xxx|7xxx|9xxxxxxxT|91xxxxxxxxxx|9[2-
9]xxxxxxxxx|911|[89]911|[89]1800xxxxxxx|[89]1855xxxxxxx|[89]1866xxxxxxx|[89]1877
xxxxxxx|[89]1888xxxxxxx" dialplan.1.digitmap.timeOut="3"
dialplan.2.digitmap="1xxx|5xxx|6xxx|7xxx|9xxxxxxxT|91xxxxxxxxxx|9[2-
9]xxxxxxxxx|911|[89]911|[89]1800xxxxxxx|[89]1855xxxxxxx|[89]1866xxxxxxx|[89]1877
xxxxxxx|[89]1888xxxxxxx" dialplan.2.digitmap.timeOut="3"
/>
</config>
The pattern explanations include:
1xxx Internal ext
5xxx Internal ext
6xxx Internal ext
7xxx Internal ext
9xxxxxxxT Local 7 digit
91xxxxxxxxxx Long distance
9[2-9]xxxxxxxxx Local 10 digit
911 Emergency 911
[89]911 Emergency 911 or 811
[89]1800xxxxxxx Toll free
[89]1855xxxxxxx Toll free
[89]1866xxxxxxx Toll free
[89]1877xxxxxxx Toll free
[89]1888xxxxxxx Toll free
Updating the Telephone Image Files
If you have been instructed to update the 3Com telephone image files, follow these steps.
1 Make sure that you have updated the bootloader image (see
Updating the Bootloader
Image) and the 3Com Asterisk Appliance firmware image (see Updating the 3Com Asterisk
Appliance Firmware Image).
2
Establish a connection from your PC to the appliance using one of the following:
Terminal emulation software (such as HyperTerminal), using an adapter to connect the
serial port on the 3Com Asterisk Appliance to the serial port on your PC.
The terminal settings are: