AEG 3007VNM-M Range User Manual


 
B - Accessories
Your appliance should come equipped with the following items.
1 x pair of Retractable Slide Runners fitted to upper position and capable of being moved
to any selected position as required
1 x Deep Enameled Roasting Pan with dual height reversible Grill Rack insert – ready for
sliding into side rack positions or fitting onto Retractable Slide Runners
2 x Wire Oven Shelves that can be fitted into Retractable Slide Runners or for sliding into
side rack positions
1 x Pyrex Dish on retention rack with handles, with dual height reversible Grill Rack insert
– fitted onto wire oven shelf
Note: Additional Retractable Slide Runners are available as an optional extra and can be
fitted at any time
Note: Additional oven shelves and pans are available as optional extras. Also, the Pyrex
dish provided is an excellent water vessel for the Steam Clean function.
C - Using the appliance for the first time
After installation remove all notification labels (not identification or warning labels) and packaging
materials. After cleaning make sure cleaned surfaces are thoroughly rinsed and wiped dry using a
clean, soft cloth.
Power on
NOTE: oven will not operate unless the clock is set.
When power is first applied the display will flash and shows 00:00.
The time of day is displayed in digital 24 hours format (e.g.: 18:00 is 6:00 pm). Press the reset
button to select manual mode and set clock as describe in section C.
Burning in
Before cooking in the appliance an initial pre-heating is required to burn off the fine oil film used to
protect the elements for shipping. The first time you heat up the oven (or grill) the oil will be given
off as smoke, which is perfectly normal.
Select a cooking mode and set the oven temperature to 180°C. With the oven door closed, leave
for approximately 5 minutes.
Repeat the above step for each cooking mode.
After completing the above make sure all controls are turned off. The oven is now ready for
cooking and grilling.