Filter
Top Products
31
REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300°C, 25 watt small
Edison Screw.
CAUTION: Disconnect the appliance from the
electricity supply before replacing the bulb.
1. Make sure the appliance is cool before you
replace a bulb
2. Open the door and remove the shelves, side
panels and wirework runners.
Instructions on how to remove the wirework
runners and side panels are given on page 28.
3. Pull the glass bulb cover towards you and then
pull it off. If necessary use a screwdriver to
carefully lever off the cover, taking care not to
damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Refit the side panels, wirework runners and
replace the oven shelves.
7. Restore the appliance to the electricity supply and
reset the time of day.