Filter
Top Products
14
Caution: Only fill salt just before starting one of the complete washing
programmes (not the Rinse and Hold programme). This will prevent any
grains of salt or salty water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which could cause corrosion.
Salt refill indicator
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green floater is clearly visible when there is salt inside the container, and
almost disappears when tha salt has finished, (ie. every 30 - 50 washes,
depending on the setting of the water softener) reminding you to add salt.
The rinse-aid
The rinse-aid ensures brilliant crockery and also helps it to dry. It is
automatically dosed in during the hot rinsing cycle. The storage
compartment built in to the in side of the door can hold about 110 ml of
rinse-aid, which will be sufficient for between 16 and 40 dishwashing
programmes, according to the dosage setting.
Filling up the rinse-aid
Open the container by turning the lid (A) anticlockwise. Pour the rinse-aid
into the filler opening until the indicator (B) on the side of the cover turns
completely dark (i.e. until the container is full)
SR11
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in
dishwasher, specially table salt, will damage the water softener.