Filter
Top Products
Operating instructions
26
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer’s visit is not free of
charge, even during the period of guarantee.
...Error Messages Are Displayed.
• If the programme indicator for the selected wash programme is
flashing or fault code (2 is displayed on the multi-display, you can
probably rectify the fault yourself.
After rectifying this fault, press the button for the wash programme
that has been started. The wash programme continues. If the fault
code is displayed again, contact customer service.
• For all other faults, please contact customer service, stating the fault
code.
Malfunction Possible Cause Remedy
The programme indica-
tor for the selected
wash programme is
flashing:
there is no water run-
ning into the dish-
washer.
Tap is closed. Open tap.
The filter in the threaded
hose fitting is blocked.
Clean the filter in the
threaded hose fitting.
The water inlet hose is not
correctly laid.
Check hose installation.
Fault code (2 is dis-
played on the multi-
display.
The programme indica-
tor for the selected
wash programme is
flashing.
The siphon is blocked. Clean siphon.
The water drain hose is not
correctly laid.
Check hose installation.
Fault code (3 is dis-
played on the multi-
display.
The leak prevention system
has been triggered.
Close the tap and contact
customer service.