Filter
Top Products
13
When this has been done, all that is required is to periodically top up the container
with salt. You are reminded of this by the salt container indicator light on the
control panel which comes on when the salt has run out.
The salt indicator light on the control panel can remain illuminated for 2-6
hours after the salt has been replenished, assuming the dishwasher remains
switched on. If you are using salts that take longer to dissolve then this can
take longer. The function of the machine is not affected.
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and
spot and streak free drying. The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes,
depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
anticlockwise.
2. Add the rinse aid until the container is
completely full.
The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid
indicator light on the control panel illuminates.
If rinse aid refilling is necessary, the rinse aid
indicator light will illuminate only in setting
mode and at the end of the washing
programme. During the run of the programme it
will remain off.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess foaming during the next wash.
It is possible to deactivate the rinse aid indicator light (see following
instructions).
By default the rinse aid indicator light is active
BR01
BR03
152976 12/1en 27-05-2002 11:45 Pagina 13