Filter
Top Products
14
To deactivate the rinse aid indicator light be sure that
the dishwasher is off and then proceed as follows:
1. Press INTENSIV 70° and NORMAL 65° programme push buttons simultaneously.
2. While keeping the programme push buttons INTENSIV 70° and NORMAL 65°
pressed, switch on the dishwasher by pressing the On/Off push button.
The On/Off indicator light comes on. At the same time, the indicator lights of the
INTENSIV 70° and NORMAL 65° programme push buttons start flashing.
3. Press the NORMAL 65° programme push button, the correspondant indicator
light keeps flashing while the indicator light of the INTENSIV 70° programme
push button turns off.
At the same time the indicator light
"end of programme" starts to flash.
4. Press the NORMAL 65° programme push button again, the
"end of programme"
indicator light turns off, this means that the rinse aid indicator light has been
deactivated.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off
push button.
To reactivate the rinse aid indicator light follow the same process until the
"end of
programme" indicator light starts to flash.
°
°
SO500
°
°
SO502
152976 12/1en 27-05-2002 11:45 Pagina 14