Filter
Top Products
30
Maintenance and care
● The hood must always be disconnected from the
mains power supply before beginning any
maintenance work.
Metal grease filter
● The purpose of the grease filters is to aspirate grease particles
which form during cooking and it must always be used, either in
the external evacuation or internal recycling function.
Attention: the metal grease filters must be removed and washed,
either by hand or in the dishwasher, every four weeks.
Open the metal grease filter
● Push it towards the back of the
unit and then pull it down and
out.Fig. 4.
Hand washing
Soak grease filters for about one hour in hot water with
a grease-loosening cleaner, then rinse off thoroughly
with hot water. Repeat the process if necessary. Refit the
grease filters when it are dry.
Dishwasher machine
Place grease filters in dish washer. Select most powerful
washing programme and highest temperature, at least
65°C. Repeat the process. Refit the grease filters when it
are dry.
When washing the metal grease filter in the dishwasher
a slight discoloration of the filter can occur, this does not have any
impact on its performance.
● Clean the inner housing using a hot detergent solution only (never
use caustic detergents, abrasive powders or brushes).
Fig. 4