Filter
Top Products
19
Introduction
Extractor version
● The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting activated carbon filters (special
accessory).
● You will need original AEG activated carbon filters for this function
(see Special Accessories).
● The air is forced out through a hose fitted to the top of the hood
A. Fig. 1.
● The outlet hose must have a diameter of 120 mm (special
accessory) for the filtering version.
● Fit the connection ring above the hood with two screws then fir an
exhausting pipe long enough to reach the outside. Fig. 1.
● If the cooking vapour is passed through an outside wall, you will
need an MKZ telescopic wall pipe (with intake and ventilation) E-
Nr.: 610 899 004 (120 mm Ø) from our range of special
accessories.
Fig. 1
A