Filter
Top Products
16
Setting/changing the cooking time
1. Select the desired cooking zone using the cooking zone selection buttons
and set the desired heat setting.
2. Press the "Timer" button to activate the timer function for this cooking
zone.
3. Using the
or buttons, set or change the amount of time required
until the cooking zone is to switch off automatically (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time left.
The small "Timer Active" indicator is also illuminated for the respective cooĆ
king zone, e.g. the upper left indicator corresponds to the rear left cooking
zone.
At the end of the cooking time set, the cooking zone switches off automaĆ
tically and an acoustic signal sounds.
4. Touch the TIMER button to switch off the signal and the indicator.
For quicker adjustment, leave your finger on the
or button until the
desired value is reached.
If the
button is operated first, the time setting starts at 99 minutes. If
the
button is operated, the time setting starts at 1 minute.
Displaying the remaining cooking time
Select the desired cooking zone using the cooking zone buttons.
If the selected cooking zone is in timer mode, the remaining cooking time
appears in the "Cooking Time" display field.
Use of the timer as an interval timer (egg timer)
Important! There must be no cooking zones programmed with the timer!
1. Press the "Timer" button to activate the timer function.
2. Set desired time using the
or buttons (e.g. 20 minutes).
The timer starts after a few seconds and indicates the amount of time left.
When the time set is at an end, an acoustic signal sounds.
3. Touch the TIMER button to switch off the signal.
Operating Instructions
.
.