Filter
Top Products
23
What to do if ...
Remedial action in the case of malfunctions
A malfunction may only be caused by a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work
on the appliance if the following information does not provide assistance
in your specific case.
Warning: Repairs to the appliance may only be carried out by approved
service engineers. Improper repairs can cause injury or serious malfunction.
If your appliance needs repairing, please contact your local AEG Service
Force Centre.
What to do if ...
.... the cooking zones do not function?
Check whether
- the appliance is switched on,
- the control lamps are on in the operating field,
- the respective cooking zone is switched on,
- the cooking zone power level has been set to the desired cooking-on
level,
- the fuses in the house installation (fusebox) have tripped.
If the fuses repeatedly trip, call in an approved electrician.
- the safety cut-out of the cooking zones has been tripped.
.... the cooking zones cannot be switched on?
Check whether
- the operating field is locked,
- a time period of more than 10 seconds has expired between the operaĆ
tion of the On/Off key and switching on the desired cooking zone,
- the touch surface is too large
(the finger should only be used lightly)
- the touch switch has been partly covered by a damp cloth or by a liquid.
- the operating field has been touched too soon following a mains failure
(to clear the condition, switch the fuse out and then in again).
Operating Instructions