Filter
Top Products
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds. For
the subsequent few seconds the display shows software version.
Setting the time of day
After the software version goes off, the display shows and "12:00". "12" flashes.
1. Press
or to set current hour.
2. Press
to confirm (necessary only for the first setting, later new time will be saved
automatically after 5 seconds).
The display shows
and set hour. "00" flashes.
3. Press
or to set current minutes.
4. Press
to confirm (necessary only for the first setting, later new time will be saved
automatically after 5 seconds) .
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the oven is off.
Press
. The set time and symbol flash in the display. To set new time use the proce-
dure "Setting the time of day".
DAILY USE
WARNING!
Refer to "Safety information" chapter.
To use the appliance, press the control knob. The control knob comes out.
Activating and deactivating the appliance
1. Turn the oven functions control knob to select an oven function.
2. Turn the temperature control knob
/ to set a temperature.
3. To deactivate the appliance turn the oven functions control knob to off position ("0") .
Knob symbol, indicator or lamp (depends on the model - refer to the appliance
overview):
• The indicator comes on when the oven heats up.
• The lamp comes on when the appliance operates.
• The symbol shows whether the knob controls one of the cooking zones, the oven func-
tions or the temperature.
Daily use
9