Filter
Top Products
Residual heat indicator
When you deactivate the appliance, the display shows the residual heat. You can use the
heat to keep the food warm.
Energy saving
The appliance has some features that help you save energy during everyday cooking:
• Residual heat:
– the heating function or programme operates: the heating elements are deactivated
10% time earlier (the lamp and fan continue to operate). The condition: the cooking
time is longer than 30 minutes or you use the clock functions (Duration, End Time).
– the appliance is deactivated: you can use the heat to keep the food warm. The display
shows the remaining temperature, the bars show the decreasing temperature.
• Deactivate the lamp - touch and hold
for 3 seconds to deactivate the lamp during
cooking.
• Eco functions - refer to section "Heating Functions" (for selected models only).
CLOCK FUNCTIONS
Clock functions
Symbol Function Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This function has
no effect on the operation of the appliance. You can also acti-
vate it in off state. Use
to activate the function. Press or
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation (max. 23 h
59 min).
End Time
To set the switch-off time for a heating function (max. 23 h 59
min).
You can use Duration and End Time at the same time, if you want to automatically activate
and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heat-
ing elements after 90 % of the set time. The appliance uses the residual heat to continue
the cooking process until the time ends (3-20 minutes).
Setting the clock functions
1. Set the heating function.
2. Press
again and again until the display shows the necessary clock function and the
related symbol.
3. Press
or to set the necessary time. Press OK to confirm.
Clock functions
15