Filter
Top Products
2. Press OK to confirm.
Child Lock
The Child Lock prevents an accidental operation of the appliance .
Activating the Child Lock
1. Activate the appliance.
2. Touch
and at the same time until the display shows a message.
Deactivating the Child Lock
1. Press OK key.
2. Touch
and at the same time until the display shows a message.
SET + GO
The SET + GO function lets you set a heating function (or programme) and use it later with
one press of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Press
again and again until the display shows Duration .
4. Set the time.
5. Press
again and again until the display shows SET + GO .
6. Press OK to confirm.
To start SET + GO, press any sensor field (except for
). The set heating function starts.
When the heating function ends, an acoustic signal sounds.
When the heating function operates, the function Control Lock is on.
You can activate and deactivate the SET + GO function in the Basic Settings menu.
Auto Switch Off
The appliance deactivates after some time:
• if you do not deactivate the appliance
• if you do not change the temperature.
temperature Switch off time
30 °C -120 °C 12.5 h.
120 °C - 200 °C 8.5 h.
200 °C -250 °C 5.5 h.
250 °C -maximum °C 3.0 h.
The Automatic switch-off works with all functions, except for Light, Core Temperature Sen-
sor, Duration and End Time.
Additional functions
21