Filter
Top Products
After 90 % of the set time, an acoustic signal sounds. The appliance deactivates. The
display shows a message.
4. Press a sensor field to stop the signals.
With Duration and End Time the appliance deactivates automatically.
With Duration and End Time you must set the heating function and the temperature first.
Then you can set the clock function.
When you use Core Temperature Sensor, Duration and End Time do not work.
Heat + Hold
You can activate or deactivate the function in the Basic Settings menu.
The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activates
after the baking or roasting procedure ends.
Conditions for the function:
• The set temperature is more than 80°C.
• The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80°C.
4. Press
again and again until the display shows Heat + Hold . Press OK to confirm.
When the function ends, an acoustic signal sounds.
The Heat + Hold function operates for 30 minutes.
The Heat + Hold function stays on if you change the heating functions.
Extra Time
The Extra Time makes the heating function continue after the Duration ends.
• Applicable for all heating functions with Duration or Weight Automatic.
• Not applicable for heating functions with Core Temperature Sensor.
Activating the function:
1. When the cooking time ends, an acoustic signal sounds. Press any sensor field.
2. The display shows the message for Extra Time for five minutes.
3. Press
to activate (or to cancel).
4. Set the Extra Time period. Press OK to confirm.
16 Clock functions