AEG CG 6400 Espresso Maker User Manual


 
g
46
11 Preparing hot water
The hot water can be used to pre-heat
cups and for making hot drinks, e.g. tea
or instant soups.
1
Caution! Danger of scalding when the
hot water nozzle is activated! Hot
water or steam output can cause
scalding. Activate the hot water nozzle
only when a container is under the hot
water nozzle.
0 Place a container under the hot water
nozzle.
0 Turn the knob for steam and hot water
to the position (Fig. 10). Hot water
is dispensed; the display shows «HOT
WATER».
3
You should not run off hot water for
more than two minutes at a time.
0 After you have dispensed the hot water
turn the knob for steam and hot water
back to the position (Fig. 10) and
remove the container.
12 Setting the grinding
texture
The appliance is preset to grind to a
medium texture. If you find that coffee
delivery is either too fast or too slow
(in drips), the grinding texture can be
adjusted during the grinding process.
1
The grinder setting may be changed
only while coffee is being ground.
Making adjustments to the stationary
grinder can damage the coffee
machine.
0 Set the grinding texture (Fig. 12) using
the knob for setting the grinding tex-
ture (Fig. 2, T).
If the coffee is delivered a drop at a
time or not at all, turn the knob one
click clockwise.
Turn one click at a time until the
coffee is delivered satisfactorily.
If the coffee is delivered too fast and
the crema is not to your tase, turn
the knob one click anticlockwise.
3
Avoid turning the knob for setting the
grinding texture too far, otherwise
when you select 2 cups, the coffee may
emerge drop by drop.
3
The effect of these adjustments will
only be evident after at least 2 cups of
coffee have been prepared.
Remove foreign objects from the
grinder
Foreign objects such as small stones in
the grinder can damage the grinder. A
foreign objects in the coffee causes a
loud, regular rattle. If you hear this
noise while coffee is being ground,
immediately switch off the coffee
machine and call the Customer Service
Centre.
13 Menu settings
13.1 Setting the language
You can choose between several lan-
guages. Another language can be
selected as follows:
0 Press the "Menu" key (Fig. 4).
The menu item «CHOOSE LAN-
GUAGE» appears.
0 Confirm the menu item with the "OK"
key (Fig. 5). The set language appears in
the display.
0 Press the scrolling keys "<" or ">" (Fig.
5) until the desired language appears.
0 When the desired language is dis-
played, confirm it with the "OK" key
(Fig. 5). This language is now pro-
grammed.
If "OK" is not pressed, after about
120 sec. the appliance returns auto-
matically to the coffee mode without
storing the setting.
3
After programming, the display auto-
matically returns to the menu item
«CHOOSE LANGUAGE».
0 To return to the coffee mode, press the
"Menu" key (Fig. 4) or wait about
120 sec. for the machine to return
automatically to the coffee mode.
822_949_344 CG6400.book Seite 46 Mittwoch, 25. Oktober 2006 12:38 12